1. Flow: 100 L/MIN
2.Lift: 12 M
3. Ultimate Vacuum: 0.098(2KPa)
4. Single lap Air Suction Amount: 10L/MIN
5. Water Tank Capacity: 57L

1. Flow: 60L/MIN
2. Lift: 8M 3. Tap: 2
4. Tapping capacity: 10L/MIN
5.Volume: 15L

1. Type: Two-Stage, Oil-sealed
2. Pumping Speed: 3.6-7.2 m3/h, 1-4.8 L/S
3. Speed: 1400 r/min(50HZ), 7720 r/min(60HZ)
4. Oil capacity: 0.7-1.2 L
5. Equipped with a gas ballast valve
6.Inter Diameter of inlet port: 16/25 mm
7.Outer Diameter of outlet port: 20/30 mm

1. Flow rate: 10 L/min
2. Maximum vacuum: 80 kPa
3. Optimum working time: 30 min
4. With dual functions of air extraction and blowing

1. Pumping Speed: 30 L/Min, 60 L/Min
2. Ultimate Vacuum: 50 mbar, 200 mbar
3. Pump Head: 2
4. Air Inlet/ Outlet: φ6(mm)
5. Positive-negative pressure dual purpose Get Quotes Now!

1. Pumping Speed: 45 L/min
2. Ultimate Vacuum: 950 mbar
3. Extreme Pressure: 50 mbar
4. Inlet Diameter: Φ10×Φ7mm
5. Provides negative pressure condition

1. Pumping Speed: 25 L/Min, 40 L/Min
2. Ultimate Pressure: 8 bar, 65 bar
3. Inlet Diameter (mm): Φ10×Φ6 mm

1. Pumping Speed: 30 L/Min
2. Ultimate Vacuum: 200 mbar
3. Positive-negative pressure dual purpose
4. Air Inlet/Outlet: φ6 mm

1. Pumping Speed: 20 L/Min
2. Ultimate Vacuum: 200 mbar
3. Negative pressure
4. Pump Head: 1

1. Pumping Speed: 15 (L/Min)
2. Ultimate Vacuum: 250 mbar
3. Positive-negative pressure dual purpose
Air Inlet/Outlet: φ6 mm

1. Pumping Speed: 25 L/min
2. Max. vacuum: 13 mbar
3. Motor Speed: 1700 rpm, 1450 rpm
4. Outlet: 10mm
5. Two-stage pump
6. Built-in thermal protection device

High Altitude Test Chamber can combine temperature and altitude environment with optional humidity for simultaneous environmental testing. It’s used in line aeronautics, aerospace, communications, information, electronics, electrical and so on. This combination of elements allows precise simulation of real-life condition a product might encounter at various altitude levels