Water Automatic Smoke Generator NWSG-200 is a fully automatic microprocessor controlled direct smoke generating unit for producing sufficient amount of smoke for continuity of smoking process. It is made up of stainless steel frame with a furnace sleeve, ignition heater, grate rotary chip feeder, ash-pita condensation container, water and compressed air container. It burns 3 mm to 10 mm smoking chips and consists of container of 50 L chips storage. Rotary comb in grate cleans the surface of grate during operation mode. Smoke outlet is equipped with a system for sprinkling and purifying smoke.

Microbial Air Sampler NMAS-201 is designed by unibody shell, solid and durable sampler device with a high sampling speed and accuracy. The sampler has many tiny holes through which the air is aspirated and also that reduces the puffball superposition and error of animalcule count. Programmable, sampling quantity can be set from 0.1 to 2.0 steres that in turn saves sampling time and other parameters. The sampling mouth is 397 meshes, the diameter is 0.7mm micropore resulting in the reduced bacterial overlap and microbial count error.

Microbial Air Sampler NMAS-200 is a high-efficiency multi-hole inhaled air sampler. It is designed in regard to the principle of isokinetic sampling by the two theories of the particles-impact and equal-flow-sampling. When sampling port is 397 meshes with a diameter of 0.7mm Micropore, which reduces bacterial overlap and microbial counting errors, planktonic bacteria with air highly-speed thrill through a ventage, and then they impinge on the surface of the agar in the culture medium. When the microbes are cultivated, they will be dynamic-hydrated and high-speed flowing because of which we can procure results quickly.

Compressed air collector NCAC-200 is used to determine the microorganism according to the specifications of the new GMP method and the microbiological detection for phytoplankton sampler is up to 50L/min, 100L/min. In the sampling process, the input gas is not wasted, and 100% of input gas is applied to the process sampling. The core components are imported from the original two compressed air collector and compatible gases used are helium(hr), argon(Ar) and nitrogen(N) gas also Adjust the cavity pressure in the body, but on meter readings, observe whether the appropriate adjustment.

Aerosol Generator NASG-200 is portable cold type equipment. It is designed to generate atomized liquid aerosols by blowing compressed air through a circular slot type nozzle. The regulator enables to monitor the pressure and concentration of air inlet as per the requirements. It is entirely enclosed in a hood with low noise levels, ensuring safety and reproducibility of the generator performance.

Aerosol Generator NASG-101 is a safe aerosol generator coupled with a photometer. The aerosol particles produced have a wide diameter and provide challenge particles to measure the efficiency of filtration systems. Features oil circuit protection supply system and heat exchange function. The unit has flow range of 1,500 to 65,000 CFM (42 to 1839.5 m3/min), requires compressed inert gas and is easy to operate and stable.